Out Of This World Info About How To Clean A Pistol Barrel

Slide it back and forth several times through the bore of the barrel until it is thoroughly scrubbed.

How to clean a pistol barrel. It's a good idea to clean. Figuring out how to clean a gun barrel isn’t as challenging as it sounds. 111 order some true bronze wool (absolutely no steel wool).

Bring slide back onto the frame and pull it back a quarter inch at least so you can rotate or set the takedown back into place. Insert the plug on the jag’s pointed end, wet it insolvent, then use constant pressure to drive it through the bore tube and barrel. The take down will hold the slide onto the frame.

Clean the rail and slide. To begin, attach a bore brush to the cleaning rod. In this brief video larry potterfield, ceo and founder of midwayusa, demonstrates the process.

A dirty, fouled barrel can destroy the accuracy of any rifle. • use straight, even strokes, taking care not to force or bend a cleaning rod while pushing and pulling it. It removes carbon and copper.

Brush through the pistol barrel. You can reapply solvent to. Stroke the barrel with that one patch 10x (again don’t completely exit the muzzle).

Clean the barrel and chamber using a nylon brush and cleaning rod, dry brush the chamber and the barrel bore to remove the carbon fouling stuck in the pistol. This patch will eliminate any leftover sweet’s solvent and will tackle any left over carbon fouling. Use your method with a brass jag and cotton patch with enough strands of wool to make a snug fit.